Angle Expansion Strip is a product that reduces the potential for damage caused by vertical movement of concrete slabs. In use, the Angle Expansion Strip forms the slab edge into an angular shape, down and away from the wall. Shaping the slab edge in this manor prevents a possible binding of the slab-to-wall juncture, allowing the slab to "float". In the event that the slab is lifted by expansive soil, the floating slab minimizes the potential for cracking of the slab, while reducing upward pressures on the wall.

ArcVoid™ is designed for use with WallVoid™ to correctly void the circular edge of a drilled pier under a poured concrete wall or grade beam. ArcVoid is manufactured of corrugated paper, with a moisture resistant waxed exterior and is designed to withstand imposed loads during construction. ArcVoid is available in a variety of standard strengths and sizes. Custom ArcVoid can be designed to support almost any concrete load. End caps used with ArcVoid seal the exposed ends of full or partial pieces.

BackFill Retainer™ is a white, (HDDP) plastic product that prevents backfill soil from displacing void form under grade beams and slab edges. It is made of strong, rigid plastic, and is impervious to soil and water. Its thin, lightweight design allows for easy handling and storage savings. It is proven to outperform precast blocks, fiberboard, or lumber.

Beam Pocket is a disposable product that can be nailed to a plywood form to create a blockout in a concrete wall for beam placement. The resulting pocket is precisely sized and shaped, with corners and edges that are straight and true. To avoid spalling (chipping at the corners and edges) during form removal, SureVoid Beam Pocket forms have tapered sides. The savings in time alone more than outweigh the cost of materials required to do the job right.

SureVoid® Blockouts are corrugated paper products that provide a better alternative in forming awkward spaces during concrete construction. These disposable, water-resistant void pieces are available in standard and custom designs and have a variety of uses, such as forming keyways, ledges, beam pockets, pipe openings, etc. Custom blockouts are manufactured to accommodate contractors' specifications, thereby providing flexibility in construction decisions.

Brick Ledge for aluminum forms is a horizontal paper product that blocks out concrete where brick is to be placed and designed for use with aluminum forms. This product is easily attached to the aluminum form using LedgeLock™, a construction tool that adapts to most aluminum wall form systems. They are lightweight and easy to install; can be easily cut to shorter lengths. Each piece is 5ft. in length, covered with a water resistant coating, and can be installed in just seconds. This product comes either factory-assembled or knocked-down (K.D.) for convenience and lower cost.

Brick Ledge for wood forms is a horizontal paper product that blocks out concrete where brick is to be placed. They are lightweight and easy to install; can be easily cut to shorter lengths; and are notched at the ends so grade line can be seen while nailing to the form. Each piece is 5ft. in length, covered with a water resistant coating, and can be installed in just seconds. This product comes either factory assembled or knocked down (K.D.) for convenience and lower cost.

SureVoid® Chamfer Ledge is an angled blockout used at the top of a poured wall that gives a desired architectural finish.

Column Wrap is a uniquely designed paper product that surrounds and isolates adjustable posts from concrete slabs.

Commercial Ledge is a paper product that is placed vertically between form ties which blocks out large areas where brick or tie placement is required. Commercial Ledge can be installed in much less time than conventional methods and they are made to fit between ties and wood plates at top and bottom. They are lightweight and easy to install, each piece being covered with a water resistant coating.

All Commercial Ledge is designed and custom manufactured for each individual application.

Commercial SureTops are the easy, economical answer to accurately form tops of poured-in-place concrete piers. Available in both flat and wrap-around, prescored SureTops are easy to ship, store and install. They assure properly formed drilled pier tops, prevent concrete waste and eliminate damage from expansive soil uplift. To use the flat style, simply open, shape, install and manually fill with concrete to the required, top-of-caisson elevation. Wrap-around Commercial SureTops offer one step assembly and are ideal for use in areas not suited for I-piece, rigid forms shaping piers with long rebar projections or returns that are larger than form diameters Unroll SureTops, place around reinforcing, position interlocking ends, insert wooden spline connector, position and fill manually to the desired elevation.

SureVoid® Deck Supports are an alternative support used under decking systems where a larger than normal void space condition is encountered.

SureVoid® End Caps are an optional part of both the WallVoid™ and SlabVoid™ Systems that are used to prevent moisture and concrete from flowing into open ends of these products, particularly helpful when the product has been cut to length on-site. SureVoid® End Caps are also used with Brick Ledge™ for aluminum forms, Brick Ledge™ for wood forms and Commercial Ledge Forms.

PanVoid™ forms are corrugated paper products that provide an alternative construction method when forming waffled ceiling structures. They can be made with conventional tapered sides to specification or with perpendicular sides to reduce concrete weight and volume.

Pipe Wrap is a paper product that surrounds and isolates all sizes of pipe protruding from concrete slabs.

Separator Void separates freshly placed concrete from an existing vertical structure, where minimal space prohibits conventional forming.

SlabVoid™ is a corrugated paper product that helps eliminate severe damage by creating a space between the structural concrete slab and underlying expansive soils. SlabVoid material, lying under structural concrete construction, absorbs ground moisture and loses strength only after the concrete has set, creating space into which soil can expand without causing damage. SlabVoid is designed to withstand the working load of the concrete construction process, and then deteriorate with the absorption of moisture.

• Commercial SureTops™ - Cylindrical corrugated form that properly contains upper portion of concrete piers.
• SlabVoid™ Corrugated paper product that helps eliminate severe damage by creating a space between the structural slab and underlying expansive soils.
• SureRound PierVoid™ - Prefabricated void with radial, sealed vertical edge to conform to pier diameter.
• SureCover™ Board - 1/8 inch to 1/4 inch hardboard that protects forms from puncture and other damage during concrete placement.

SlabVoid™ is a corrugated paper product that helps eliminate severe damage by creating a space between the structural concrete slab and underlying expansive soils. The SlabVoid material, lying under structural concrete construction, absorbs ground moisture and loses strength only after the concrete has set, creating space into which soil can expand without causing damage. SlabVoid is designed to withstand the working load of the concrete construction process, and then deteriorate with the absorption of moisture.

SureCover™ protective cover board is used with SlabVoid™. In use, they are placed over the entire surface to span small gaps (2" or less), and to protect against puncture from rebar chairs, work boots, etc.

SureRetainer™ by MotzBlock® is a soil retainer that prevents backfill from displacing void form under grade beams and slab edges. Lightweight design allows nesting for storage savings. SureRetainer is proven to outperform precast blocks, fiberboard, or lumber. Overlapping, self-sealing capability provides easy, continuous retainer installation.

SureRound PierVoid™ is a concrete form that is designed to totally surround the upper portion of concrete piers. The use of these forms assures creation of the proper void under pier caps, pilasters and structural slabs SureRound PierVoid™ is available in round, square and rectangular shapes with a full range of sealed interior diameters to correctly match each caisson. SureRound PierVoid products are available in round, square or rectangular shapes, all having sealed circular cutouts to correctly surround drilled piers. Square or rectangular shapes are designed to be used in conjunction with SlabVoid™ corrugated paper void forms, which create a temporary support for the placement of structural slabs over expansive soils.

WallVoid™ System products provide temporary support systems for liquid concrete until the concrete sets and can support itself, They are ideal for concrete components that span across drilled piers, pads, intermittent footings, as well as other concrete work.

The WallVoid material, lying under structural concrete construction, absorbs ground moisture and loses strength only after the concrete has set, creating space into which soil can expand without causing damage.

• WallVoid™ (FormVoid™ (with panel flange), TrenchVoid™ or TrapVoid™) to create space into which soil can expand below wall surfaces.
• ArcVoid™ to correctly void the circular edge of a drilled pier.
• Commercial SureTops™ to provide a neat well-formed caisson top.
• Seam Pads to cover joints and prevent moisture absorption and concrete from seeping in between void forms.
• End Caps at exposed ends of void forms to prevent moisture and concrete from flowing into material.

WallVoid™ is a corrugated paper product that creates temporary support for the placement of concrete walls and grade beams spanning between supporting elements where expansive soils are present below. It is manufactured from corrugated paper, with a moisture resistant waxed exterior and is designed to withstand imposed loads during construction.

Although WallVoid™ is available in a variety of standard strengths and sizes, custom product can be designed to support almost any concrete load.